본문 바로가기

가스감지기·가스측정기/가스감지기 - 감지부 (방폭)

염소(CL2)가스 감지기/지시형 염소(CL2)가스 경보기 (MODEL : SI-100 CL2)










① 제품특징


SI-100는 잠재적인 폭발 위험이 존재하는 장소에 설치하여 염소(CL2) 및 유독성 가스, 가연성 가스 등 누출 및 누설을

측정 및 감지하는데 사용되는 현장 지시형 가스 감지부입니다. LCD 표시장치를 통하여 가스의 농도 뿐만 아니라

기기 전체의 진단결과를 표시하여 주고, 표준 4-20mA 아날로그 출력을 사용하여 가스 모니터 수신부와 연결 할 수 있습니다.

    • 현장지시형 제품으로 가연성 가스, 독성가스 및 산소농도 측정 및 감지기

    • 마그네틱바를 사용하는 간편한 조작

    • 불루 백라이트를 내장한 대형 디지털 LCD

    • 내압방폭 및 방수방진 구조

    • 자동 캘리브레이션 기능 내장
    • 러시아표준 규적인증 보유
    • 유럽전자판 적합인증 보유











② 주요사용처

  • 제철소, 석유화학,정유, 조선소, 폐수 및 정화소 처리시설, 광산, 통신사, 탱크, 밀폐공간 작업장 등











③ 제품사양


SPECIFICATION
MECHANICAL
EnclosureABS/Polycarbonate, IP54 rated with splash guard installed.
Copper coated interior to reduce RF interference.
Weight400g
Size127 x 127 x 61 mm
USER INTERFACE
DisplayGraphic LCD
Magnetic SensorsUsing a magnetic wand, initiate calibration without opening the enclosure
INPUT / OUTPUT
Output- Linear 4 - 20 mA analog
- Maximum 216 Ω load (wiring plus termination resistor) @ 12 VDC
- Maximum 316 Ω load (wiring plus termination resistor) @ 12 VAC
- Voltage 0 - 10 volt
- Minimum 1k ohm load
Relay1 SPDT dry contact, rated 30 volts, 2 amps max
Audible AlarmStandard internal buzzer; enable / disable
ELECTRICAL
Power Requirement
  3-wire mode16 - 30 VDC, 3 W, Class 2
  4-wire mode12 - 27 VAC, 50 - 60 Hz, 3 VA, Class 2
Wiring- VDC (or ground referenced AC) 
  three conductor shielded 18 awg stranded
- VAC four conductor shielded 18 awg stranded
FusesThermal, resetting
ENVIRONMENTAL
Operating Temperature-20℃ to 40℃ (-4℉ to 104℉)
lower temperature option available
Humidity15 - 90% RH non-condensing
CERTIFICATION
Conforms to : CAS-C22.2 No. 205-12, UL508 (Edition 17):2007
Conforms to : EMC Directive 2004/108/EC, EN 50270:2006, Type 1, EN61010
Conforms to : FCC. This device complies with Part 15 of the FCC Rules.